← Logo 400 ... 690

logo 550 swashplate

Mikado Model Helicopters › Logo 400 ... 690 · Started by vic2016 on 17 May 2026 22:3817.05.2026 22:38
vic2016 17 May 2026 22:3817.05.2026 22:38
logo 500 04868 Swashplate LOGO 550/600/690
swshplate ball join it came out, how to glue and what glue is work best
i try hot glue like eposy its work

i have TL242 and TL680
Eddi E. aus G. 18 May 2026 08:5518.05.2026 08:55
Hi,

I would use epoxy, that's basically for eternity.

Make sure you clean and subtly sand both the inner and outer surfaces (inner ring and ball joint), and be careful as not to get glue where it doesn't belong.

Hot glue should work, too, but as the name suggests, it's probably more susceptible to temperature changes.
I did epoxy, but never tried hot glue.

Best,

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless