MichaD
18 April 2009 22:4318.04.2009 22:43
Here is my setup that i'm using for the dyna-x electro,
servo's KOpropo
Carsten aus LA
22 April 2009 14:2422.04.2009 14:24
The tail settings are amazing! How do you get a Gain of 107?
T-Rex 600 CF|VStabi/AC3X|Mikado Kopf|Pletti 30-12HE|Jive 80 HV|3XBLS451|BLS251|10sRockerAmp|603 Edgies|
MichaD
6 Mai 2009 15:0106.05.2009 15:01
Please use this setup, i did a whole new setting, real crazey!
The tail gain can simply go to 107 gain, no problems at all.
I did some upgrades now on the heli, i changed the tailhub and the tailslider. Using the RJX ones now. there were some problems with braking the steel-hub, the RJX one is stronger.
Ps Gain stays the same :-)
Michaël
Attachments:
open |
download -
4.18.vbr
(5.5 KB)
Smooth3D
28 Januar 2010 11:0128.01.2010 11:01
I am converting my Millennium 90 to Vbar. I am asking for input based on your experience, please.
My machine is not the Dyna, so the collective servo location is standard Robbe Millie.
I'm using the RJX rotor head for 10mm main shaft. Are you using this same rotor head?
Did you have to make any geometry changes to the Millie's control system?
Did you have to use smaller or Larger servo arms / wheels on the cyclic servos?
Did you have to change the size / length of the swash plate balls - Inner or outer?
I appreciate any input you'd be willing to share with me.
Thank you.
Edited 3 time(s). Last edit at 01/28/2010 11:13AM by Smooth3D.
MichaD
30 Mai 2010 08:1030.05.2010 08:10
I didn't do any changes to the actual settings or geometry.
i'm flying with the RJX rotor head on 10mm shaft
I'm usting servo horns wit 11mm from ball to inner side.
3mm balls on the inner swash the outer are standard.
This stup is the same for the Dyna-x and Millenium 2