{"ok":true,"content":"Hi Andy,<br><br> I fly the same setup, except I use the 12S.<br> slide it into the large logo.<br> The 3,300s fit, regardless of whether they are SLS or Turnigy.<br><br> I&#39;m flying with a 20-tooth pinion, by the way, but there&#39;s a short gap.<br> Stops after 2000 rpm.<br> But I have no problem with that, the little one has it<br> It&#39;s already quite steamy.<br><br> The 60LV is sufficient for me, by the way...<br> I would invest the saved money in a large VBar (vstabilizer).<br> The extra sensor can be glued to the bottom of the platform.<br> because the smaller one is more prone to vibrations than the larger logos.<br><br> You can buy the Savox servos without hesitation; mine have...<br> Several hundred flights already, everything&#39;s great.<br><br> Best regards, Fred<br> ------------------------------------------------------------------------------------------------------<br> Goblin 700 - VBar Neo - VBC-t - Pyro 800-48 - 12S - Kontronik Kosmik 160 HV<br> Logo 600 SE - VBar Neo - VBC-t - Pyro 700-45 - 12S - Scorpion Tribunus II 12-80A<br> Logo 600 SX - VBar Neo - VBC-t - HK III 4035\/450 - 12S - Scorpion Tribunus II 12-80A<br> Goblin 500 - VBar Neo - VBC-t - Scorpion 4025\/100 - 6S - Scorpion Tribunus II 6-120A<br> Logo 200<br> -------------------------------------------------------------------------------------------------------","note":"machine-translated from German"}