{"ok":true,"content":"Hi,<br><br> Regarding point 1, you can try increasing the pulse from 14 ms (standard, as is also the case with Futaba) to 20 ms.<br><br> Regarding point 2: Is everything set up correctly? If necessary, try changing the settings again...<br><br> Regarding point 3: This is related to the initialization of the Savox servos. They only receive a signal from the VBar once the initialization is complete. If this takes too long (e.g., because the aircraft is shaking or the sensors, especially on older stabilizers, are somewhat unstable and the calibration takes longer), the servos enter a kind of programming mode. If you quickly unplug and plug them back in, you might trigger a warm start (log?). It&#39;s possible, but not ideal.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}