{"ok":true,"content":"Hello everyone,<br><br> That&#39;s not exactly good news after everything sounded so promising yesterday. :-(<br> After the test run at home on the workbench, the order was then placed with great enthusiasm...<br> As I understand it now, the main problem is that the telemetry link back to the transmitter affects the transmission power, which could then be far too low in the event of a problem if the launch vehicle is nearby but the model is far away.<br> Does the system return to a safe operating state as soon as the second receiver is switched off\/powered down? If so, a solution similar to Rainer2019&#39;s would be conceivable: the receiver on the launch trolley would be switched off or its power supply interrupted after the aircraft takes off. This would mean the unsafe operating state would only occur during the short drive on the runway. :-\/<br><br> Otherwise, I assume that even if you&#39;re working diligently on it, a timely solution isn&#39;t necessarily likely. It will probably take some time and won&#39;t be easy or quick to fix. So I&#39;d have to find a completely different way to control that one servo... Or is there any other tip or suggestion on how this might be possible?<br><br> Thank you so much for the insights into why it&#39;s not quite so simple and for all the answers! I certainly hadn&#39;t expected that at first. :-)<br><br> (@Geri:Quote: <strong>Dirtygeri<\/strong><br> Post a video if it works!<br> Of course, I can still do that regardless of the final servo control!<br><br> greeting<br> Niklas<br><br><br><br> Edited once. Last edited on 23.05.2024 at 15:04 by niklasm4.","note":"machine-translated from German"}