{"ok":true,"content":"Hello,<br> where is the problem?<br> It&#39;s the simplest thing in the world, just bind the second receiver in the &quot;Bind&quot; menu, and that&#39;s it.<br> Switching off the motor is also very easy with a switch that interrupts the signal from the controller to the motor (as can be seen in the picture, I have connected 2 switches in parallel for safety reasons) as soon as the glider has left the launch trolley.<br> To prevent the switch from interrupting the motor signal too early, I have built in a delay of approximately 2 seconds (1 transistor, 4 resistors, 1 capacitor).<br> Anyone who wants to switch off the motor themselves can do so with a switch that is not needed for the glider and a free channel.<br> greeting<br> Rainer<br><br><br><br> Edited once. Last edited on 21.05.2024 at 19:33 by Rainer2019.<br><br>","note":"machine-translated from German"}