{"ok":true,"content":"Hi,\r<br>\n\r<br>\nRegardless of whether it is on the same stabilizer or via the Interbus cable, a compensation current flows if the voltage on both sides is not identical.\r<br>\nRegardless of whether BEC and backup battery or two batteries.\r<br>\nThere is enough copper on the conductor traces of the pin header board, and the double power connection between two NEOs should not be a problem during operation either.\r<br>\nOf course, both batteries or both voltage sources should have matching\/identical voltages.\r<br>\n\r<br>\n\/\/\r<br>\n\r<br>\nRegardless of whether they are connected to the same VBar or to each one via the Interbus wire, equalizing currents occur if the voltage on both sides is not identical.\r<br>\nNo matter if BEC and buffer battery, or two batteries.\r<br>\nOn the pin header boards, there is enough copper on the conductive paths, and the double power wire between two NEOs should also cause no problems during operation.\r<br>\nOf course, both batteries or power supplies should be approximately of equal power and have the same voltage.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}