{"ok":true,"content":"Quote: <strong>Without a stabilization function, you (currently) trim while controlling the aircraft. This means flipping a switch (the trim function can, of course, be turned on\/off and locked), and simply flying the plane. Eventually, you&#39;ll realize that you can leave the sticks centered for straight flight, and that&#39;s it. During this time, small control inputs are continuously written to the trim memory.<\/strong><br><br> ...and for auto-trim with stabilization, you need calm air and as long a period as possible without any sudden maneuvers? So similar to trimming a helicopter?<br><br> Quote: <strong>You can&#39;t see the center of the buttons either, ...<\/strong><br><br> Yes, of course! If the display shows &quot;0&quot;, the trim is set to center; then only the values in Subtrim and possibly a flight phase-specific Trim Mix setting are effective.<br> Can VBC Touch do something similar, i.e., reset the trim wheel&#39;s value to zero? Or is there an &quot;absolute mode&quot; where the wheel&#39;s position always correlates with a fixed trim value, meaning wheel in the center always means trim at zero?<br><br> Best regards, Philipp","note":"machine-translated from German"}