Iflickr
4 Januar 2026 08:5704.01.2026 08:57
Einen schönen Tag an alle!
Helikopter-Spezifikationen
RAW 580
Xnova 4025-1120kv 6s
Xdfly 155 Ampere
Torq-Servos
Xdfly Kondensator
Vbar evo v8
VBar Control evo+
Batterie SMC 5100 6S 100C
Das Problem trat mitten im Flug auf, der Hubschrauber zeigte Anzeichen einer Abschaltung und startete dann sofort wieder. Ich habe das Protokoll und die Videos hochgeladen.
https://youtube.com/shorts/ZPwXyyDvE58?si=NqdAXzS6zz92st4j https://youtube.com/shorts/xOJc5-VM_EM?si=YBdkjZ0xVrfrmRIk Ich habe einen Fehler gemacht: Ich habe den Akku getauscht, weil ich dachte, es gäbe ein Problem damit. Deshalb wollte ich einen anderen Akku ausprobieren, habe aber vergessen, den Kondensator abzuklemmen. Daher wurde der FBL nicht neu gestartet, und das Logbuch protokolliert beide Flüge. Das Problem trat bei beiden Akkus auf. Die Videos zeigen zwei verschiedene Akkus, beide vom gleichen SMC-Modell. Anhänge:
Öffnen |
Herunterladen – Archive.zip (8,6 KB)
Good day to everyone
Heli specs
RAW 580
Xnova 4025-1120kv 6s
Xdfly 155amp
Torq servos
Xdfly capacitor
Vbar evo v8
Vbar control evo+
Battery smc 5100 6s 100c
The problem was in the middle of the flight the heli gives shutdown symptoms, then starts immediately i have uploaded the log and the videos.
https://youtube.com/shorts/ZPwXyyDvE58?si=NqdAXzS6zz92st4j
https://youtube.com/shorts/xOJc5-VM_EM?si=YBdkjZ0xVrfrmRIk
I have made one mistake i swapped the battery I thought there is issue with the battery, so i wanted to try another one, but i forgot to disconnect the capacitor, so the fbl was not restarted and the log logged the both flights and the issue was there on both batteries. The videos for two different batteries both are smc same model.
Attachments:
open |
download -
Archive.zip
(8.6 KB)
Sbahzad
4 Januar 2026 09:3604.01.2026 09:36
Das sieht nach einem defekten Regler aus. Überprüfen Sie die Kabel auf lose Verbindungen.
Oder es könnte ein Problem mit der Esc-Taste sein.
Hoffentlich teilt ein Experte seine Erfahrungen.
I looks like faulty esc. Check your wires for any loose connection.
Or it could be esc issue.
Hope some expert will share though.
RV
4 Januar 2026 09:3704.01.2026 09:37
Okay – ich habe mir die Dateien und Diagramme in der Cloud angesehen.
Auf den ersten Blick ist nichts Ungewöhnliches zu erkennen; weder das Batterieprotokoll noch das Vbar-Protokoll noch unser internes Funkprotokoll geben einen deutlichen Hinweis.
Aber – bei genauer Betrachtung beider Situationen (ich glaube, ich habe sie in der Grafik in der Cloud gefunden) und des Videos kann ich Folgendes feststellen:
- Die "Abschaltung" erfolgte in beiden Fällen nach einer Überschreitung der Taktfrequenz Ihres Tic-Toc-Signals beim erneuten Anlegen von Last.
Die Überdrehzahlen sind in den Protokollen sichtbar: Die Drehzahl steigt und Stromstärke/PWM sinkt erwartungsgemäß. Schwer zu erkennen, da der Freilauf mitläuft und die Drehzahlquelle der Motor ist. (PWM und Stromstärke sinken, die Zylinderkopfgeschwindigkeit sinkt nur geringfügig.)
Ein Abschalten des ESC war unmöglich, ein Neustart hätte länger gedauert. Der ESC lief zwar noch, aber mit geringerem Strom und PWM-Wert als üblich.
Mein Fazit ist also: Es könnte sich um ein mechanisches Problem handeln. Ich würde den Freilauf überprüfen; er könnte durchgerutscht sein.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 01/04/2026 09:38AM by RV.
OK - i had a look at the files and graphs in the cloud.
For first view - there is nothing unusual, either the battery log nor the Vbar log or our internal radio log shows a big hint.
But - having a detailed look at both situations ( i gues i have found them in the graph at the cloud) and video i can see the following:
- the "shutdown" was after a overspeed in your tictoc in both cases when applying load again
- the overspeeds are visible in the logs, rpm grows up and current/pwm goes down as expected. Hard to seee because the freewheel chimes in and our rpm source is the motor. (PWM drops down and current also, Headspeed drops only a little bit)
- a ESC shutdown is impossible, would have been taking longer for a restart. The ESC was still running - but with lower current and pwm than usual
So - my conclusion at this point is - it could probably be something mechanical. I would check the freewheel, it might have slipped.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 01/04/2026 09:38AM by RV.
Iflickr
4 Januar 2026 18:5204.01.2026 18:52
Guten Tag,
Danke RV für die Antwort. Ich habe die Mechanik überprüft, es gibt keine Möglichkeit für einen Freilauf. Gibt es noch etwas anderes, das ich überprüfen könnte?
Grüße,
Good day,
Thanks RV for the reply, i have checked the mechanical there is no way for a freewheel, is there something else i can look into it ?
Regards,
RV
4 Januar 2026 19:5404.01.2026 19:54
Well - i would really check all parts of the mechanical drivetrain if there is something slipping under load.
Another thing could be that the ESC lost commutation for a brief moment (e.g. wrong timing or magnetical saturation of the motor) and stopped/restarted the motor to be back in the game. Does the effect appear on all headspeeds?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Iflickr
6 Januar 2026 03:5706.01.2026 03:57
Guten Tag,
Ich habe keine anderen Drehzahlen getestet, sondern nur mit 2 Batterien aus demselben Batterieblock.
Grüße,
Good day,
I haven’t checked other headspeeds , but only with 2 batteries with the same bank.
Regards,