Hallo,
Hm, seltsam.
Bitte teilen Sie mir die Seriennummer dieses Geräts mit, damit ich die Protokolle in Ihrer Cloud überprüfen kann (falls VBar Control Touch oder EVO und Cloud-fähig sind).
Bitte speichern Sie die Setup-Datei auch auf Ihrem Sender (Modell-Setup/Tools/Speichern), dann kann ich auch in Ihrer Cloud nachsehen.
Der ESC kann mithilfe des Bluetooth-Adapters OSHM4118 von OMPHOBBY und der Smartphone-App von Sunnysky aktualisiert werden.
*** Haftungsausschluss ***
Natürlich gehen alle Schäden, die dabei entstehen, leider zu Ihren Lasten, lieber Leser. Wie bei allen Heimwerkerprojekten gehen wir immer kalkulierte Risiken ein.
Insbesondere Schäden, die durch Fehlanschluss/Verpolung entstehen, aber auch beim Testen auf dem Prüfstand (ohne Rotorblätter) und bei der Erstinbetriebnahme.
Im Zweifelsfall wenden Sie sich an Ihren Händler vor Ort, um Hilfe zu erhalten. Sie können Ihren Heli auch zur Aktualisierung an uns senden (oder mühsam den Regler ausbauen, ihn später wieder einbauen und die Software-Updates sowie einen Testflug durchführen...).
***Ende des Haftungsausschlusses***
Sie müssen lediglich die gelben und weißen Kabel vorsichtig von den TELE-Anschlüssen abziehen (merken Sie sich die Belegung, ziehen Sie nicht an den Kabeln und reißen Sie sie nicht ab …) und sie mit den gelben und weißen Kabeln des BT-Moduls verbinden. Die roten und schwarzen Kabel (Stromversorgung, Phase und Masse) schließen Sie an eine Stromversorgung an (z. B. den Regler selbst oder einen handelsüblichen Empfängerakku). Überprüfen Sie unbedingt die Polarität.
Sobald das Gerät eingeschaltet ist, können Sie sich über die Sunnysky App mit dem ESC verbinden (Bluetooth muss erlaubt sein), die Update-Datei laden (Anhang, muss zuerst entpackt und auf Ihr Smartphone kopiert oder direkt heruntergeladen und dort entpackt werden) und den ESC aktualisieren.
Nehmen Sie keine weiteren Änderungen vor.
Ich habe hier für unseren internen Gebrauch einen Kabelbaum mit MagGyver zusammengebaut (Anhang). Er verfügt über zwei JST-Kupplungen für die Datenleitungen und einen der kleineren OMP-Stecker, um Strom vom AUX-Anschluss abzugreifen.
Abschließend lässt sich sagen, dass man mit dem aktualisierten VStabi EVO micro und dem Sender die Einstellungen für Heck und Regler auf LOGO 200 ändern kann, und das war's.
Scheint so zu sein. Sollte so sein.
Ich habe das Update kurz vor dem Mittagessen durchgeführt, um sicherzugehen, dass es so funktioniert, aber ich bin die 200er noch nicht geflogen. Übrigens habe ich dabei auch das EVO micro von 8.1.x auf 8.2.current aktualisiert, und mir ist bisher nichts Ungewöhnliches aufgefallen.
Zumindest funktionierte alles wie erwartet, solange man es in der Hand hielt, während es lief. Der Schwanz zeigte bis jetzt die erwartete Reaktion.
Witzige Tatsache: Ich kann diese iOS-App auf meinem Mac installieren und sie dort nutzen, inklusive Bluetooth.
Probiert es mit Android und unter Windows oder Linux aus ^^ :-)
Am besten,
Eddi
Zum Fliegen geboren ...
zur Arbeit gezwungen.
Anlagen:
Öffnen |
Herunterladen - Vbar-B1.9.sqlite3.zip (112,6 KB)
Hi,
hm, strange.
Please let me know the serial no. of this unit and I can have look at the logs in your cloud (if VBar Control Touch or EVO and cloud enabled).
Please also save the setup file to your transmitter (Model Setup/Tools/Save), then I can also have look in your cloud.
The ESC can be updated using OMPHOBBYs bluetooth adapter OSHM4118 and Sunnysky's smartphone App.
*** disclaimer ***
Obviously, any damage done during the process is unfortunately on you, dear reader, like with all DIY things we do, all the time, we take calculated risks ^^
Particularly damage resulting from misconnection/reverse polarity, but also when testing on the bench (w/o blades), and when maidening again.
If in doubt, contact your local dealer for help, you may also send in your heli for us to update it (or painstakingly remove the ESC, and mount it again later, and mind doing the software updates and a test flight ...).
***end disclaimer ***
All you need to do is _carefully_ unplug the yellow and white wires from the TELE ports (take note which goes where, don't pull/rip the wires ...) and MacGyver them somehow to the yellow and white wires of the BT module, and wire the red and black wires (power supply, live and ground) to a power supply (can be the ESC proper, or some standard receiver battery). Double-check polarity.
Once powered up, you can connect to the ESC via Sunnysky App (BT needs to be allowed), load the update file (attachment, needs to be unpacked and copied to your smartphone first, or downloaded and unpacked there directly), and update the ESC.
Don't make any other changes.
I MagGyvered a wire harness for our internal use here (attachment), it has two JST couplings for the data wires, and one of the smaller OMP size connectors, to steal power from AUX.
Lastly, with the VBar EVO micro and the transmitter updated, you can change the settings for Tail and ESC to LOGO 200, and that's that.
Seems to be. Should be it.
I've done the update just before lunch so I can be sure it works this way, but I haven't flown the 200 yet.
By the way, I also updated the EVO micro from 8.1.something to 8.2.current in the process, and I didn't notice anything odd, yet.
At least held in the hand while it was running, everything worked as it should, the tail showed the expected response so far.
Fun fact: I can install this iOS App on my Mac and use it there, Bluetooth and all.
Try it with Android and on Windows or Linux ^^ :-)
Best,
Eddi
Born to fly ...
forced to work.
Attachments:
open |
download -
Vbar-B1.9.sqlite3.zip
(112.6 KB)